- Model NO.: URO410/460(V)x1000/1500/2000
- Processing Accessory: Chuck Lathe
- Tool Holder: Four Position Turret
- Controlling Mode: Artificial
- Setting Mode: Floor-type
- Certification: CE, ISO 9001
- Swing Over Bed: 460mm
- Trademark: Fulai
- Origin: Shanghai
- Type: Horizontal Lathe
- Guide Rail: Horizontal Guide Rail
- Power Source: Electric
- Automatic Grade: Manual
- Precision: Normal Precision
- Condition: New
- Spindle Bore: 58mm
- Specification: CE
- HS Code: 8458190000
- Before operating the machine, remove tie, rings, watches, other jewelry, and roll up sleeves above the elbows. Remove all loose clothing and confine long hair. Do not wear gloves.
- Keep the floor around the machine clean and free of scrap material, oil and grease.
- Keep machine guards in place at all times when the machine is in use. If removed for maintenance purposes, use extreme caution and replace the guards immediately.
- Do not over reach. Maintain a balanced stance at all times so that you do not fall or lean against blades or other moving parts.
- Make all machine adjustments or maintenance with the machine unplugged from the power source.
- Use the right tool. Don't force a tool or attachment to do a job which it was not designed for.
- Replace warning labels if they become obscured or removed.
- Make certain the main power switch is in the OFF position before connecting the machine to the power supply.
|Swing over bed||410mm(16")||460mm(18")|
|Swing over cross slide||220mm(8-13/16")||270mm(10-3/4")|
|Swing in gap diameter||640mm(25-1/8")||690mm(27-1/8")|
|Valid length of gap||165mm(6-1/2")|
|Width of bed||300mm(11-13/16")|
|Taper of spindle bore||No.6 Morse|
|Range of spindle speed||12 changes, 25~2000r/min|
|Compound rest travel||128mm(5")|
|Cross slide travel||285mm(11-1/4")|
|Max.section of tool||25×25mm(1"×1")|
|Lead screw thread||6mm or 4T.P.I.|
|42 kinds, 0.031~1.7mm/rev(0.0011"~0.0633"/rev)|
|Cross feeds range||42 kinds, 0.014~0.784mm/rev(0.00033"~0.01837"/rev)|
|Main motor power||5.5kW(7.5HP) 3PH|
|Coolant pump power||0.1kW(1/8HP) 3PH|