- Model NO.: CW61(2)63/73/83/93C
- Processing Accessory: Chuck Lathe
- Tool Holder: Four Position Turret
- Controlling Mode: Artificial
- Setting Mode: Floor-type
- Certification: CE, ISO 9001
- Swing Over Bed: 630/730/830/930mm
- Trademark: Fulai
- Origin: Shanghai
- Type: Horizontal Lathe
- Guide Rail: Horizontal Guide Rail
- Power Source: Electric
- Automatic Grade: Manual
- Precision: Normal Precision
- Condition: New
- Spindle Bore: 105,130mm
- Specification: CE
- HS Code: 8458190000
- Before operating the machine, remove tie, rings, watches, other jewelry, and roll up sleeves above the elbows. Remove all loose clothing and confine long hair. Do not wear gloves.
- Keep the floor around the machine clean and free of scrap material, oil and grease.
- Keep machine guards in place at all times when the machine is in use. If removed for maintenance purposes, use extreme caution and replace the guards immediately.
- Do not over reach. Maintain a balanced stance at all times so that you do not fall or lean against blades or other moving parts.
- Make all machine adjustments or maintenance with the machine unplugged from the power source.
- Use the right tool. Don't force a tool or attachment to do a job which it was not designed for.
- Replace warning labels if they become obscured or removed.
- Make certain the main power switch is in the OFF position before connecting the machine to the power supply.
|Ø105mm(Ø130mm for CW6180E and above)|
|C-11 or D-11|
|1:20 Ø120mm(Ø140mm for CW6180E and above)|
|28-1 inch(36 kinds)|
|0.5-60 DP(27 kinds)|
|30-1 t.p.i.(27 kinds)|
|0.048-24.3mm/r (72 kinds)|
|0.024-12.15mm/r (72 kinds)|