- Model NO.: C6251
- Processing Accessory: Chuck Lathe
- Tool Holder: Four Position Turret
- Controlling Mode: Artificial
- Setting Mode: Floor-type
- Certification: CE, ISO 9001
- Swing Over Bed: 510mm
- Trademark: Fulai
- Origin: Shanghai
- Type: Horizontal Lathe
- Guide Rail: Horizontal Guide Rail
- Power Source: Electric
- Automatic Grade: Manual
- Precision: Normal Precision
- Condition: New
- Spindle Bore: 80mm
- Specification: CE
- HS Code: 8458190000
- Before operating the machine, remove tie, rings, watches, other jewelry, and roll up sleeves above the elbows. Remove all loose clothing and confine long hair. Do not wear gloves.
- Keep the floor around the machine clean and free of scrap material, oil and grease.
- Keep machine guards in place at all times when the machine is in use. If removed for maintenance purposes, use extreme caution and replace the guards immediately.
- Do not over reach. Maintain a balanced stance at all times so that you do not fall or lean against blades or other moving parts.
- Make all machine adjustments or maintenance with the machine unplugged from the power source.
- Use the right tool. Don't force a tool or attachment to do a job which it was not designed for.
- Replace warning labels if they become obscured or removed.
- Make certain the main power switch is in the OFF position before connecting the machine to the power supply.
|Max .Swing over bed||Φ510mm||Φ560mm|
|Max .Swing over cross slide||Φ300mm||Φ350mm|
|Max .Swing in gap||Φ738mm||Φ788mm|
|Max. distance between center||1000/1500/2000/3000mm||1000/1500/2000/3000mm|
|Taper of spindle bore||M.T.#7||M.T.#7|
|Range of spindle speed||20~1600rpm||20~1600rpm|
|Range of longitudinal feeds||0.028~0.803mm/rev.||0.028~0.803mm/rev.|
|Range of cross feeds||0.3~0.85mm/rev.||0.3~0.85mm/rev.|
|Range of metric threads||0.25~7mm||0.25~7mm|
|Range of inch threads||4~112T.P.I||4~112T.P.I|
|Range of modulus threads||0.25-14M.P.||0.25-14M.P.|
|Range of diametral pitch threads||4-112D.P.||4-112D.P.|
|Travel of tailstock quill||180mm||180mm|
|Taper of tailstock bore||M.T.#5||M.T.#5|
|Dia. Of tailstock sleeve||75mm||75mm|
|Max. travel of cross slide||280mm||280mm|
|Lead screw thread||4T.P.I or pitch 6mm||4T.P.I or pitch 6mm|
|Power of main motor||7.5kw||7.5kw|
|Unitary packing size||2960×1130×1820mm||3460×1130×1820mm|